Handled by Morning Book a free look

Freight density and estimated class

Enter the size and weight of what you are shipping. You get the cubic feet, the density in pounds per cubic foot, and the estimated freight class from the density scale carriers have used since 19 July 2025. Nothing you type leaves this page.

The numbers already in the boxes are an example. Type over them. Measure the longest, widest and tallest points, with the pallet and packaging included, and use the weight with the pallet on.

This is an estimate

The class here comes from density alone. Some goods have a class set by what they are, or by how hard they are to handle, stack or insure, whatever their density. The carrier's inspection decides the class on the bill, so check with your carrier or the current classification before you quote a customer.

The density scale

Heavier for its size means a lower class and usually a lower rate. Your shipment's row is marked.

Shipping every day and guessing at the cost?

I connect your order, warehouse and carrier records read-only and send one page each morning: what shipped, what it cost, and which shipments were reclassed or rebilled. A free 30-minute look shows what your systems could answer today.

This sends your email address and nothing else. Nothing you put into the tool is sent.

Book a free look

How freight density is calculated

Multiply length by width by height in inches and divide by 1,728 to get cubic feet. Divide the weight in pounds by the cubic feet. The result is pounds per cubic foot.

density = weight ÷ (length × width × height ÷ 1,728)

A pallet 48 by 40 by 48 inches is 53.33 cubic feet. At 500 pounds it has a density of 9.38 pounds per cubic foot, which falls in the 8 to 10 step: class 100.

For several pieces, add up all the weight and all the cubic feet first, then divide. Do not average the densities.

Questions

What changed in July 2025?

The freight classification moved many goods to a standard density scale and lengthened that scale from 11 steps to 13, adding classes 50 and 55 for very dense freight. The table above is the 13-step scale.

Why did the carrier bill a different class?

The usual reasons are dimensions measured at the widest points with the pallet included, a weight that left the pallet off, or goods whose class is set by what they are and not by density.

Do I include the pallet?

Yes. Use the full outside dimensions and the weight with the pallet and packaging.

Is anything I type sent anywhere?

No. The arithmetic runs in your browser.

Who made this?

Handled by Morning sets up private reporting and AI on a company's own books for businesses of about 10 to 100 people. This is one of its free tools.